NEC UNIVERGE SV8300 Command Manual page 436

COMMAND CODE TITLE:
76
Y
No. MEANING
01 For Day Mode
02 For Night Mode
03 For Mode A
04 For Mode B
NOTE:
When digit conversion of the leading 2-4 digits of a DID incoming LDN is available (CM35
Y=078, Data=0), the leading 2-4 digits of the LDN should be assigned as the first data. (When
the DID incoming LDN is one digit, the digit conversion for only one digit is not available.)
DIGIT CONVERSION ON DID CALL
1ST DATA
DATA
000-999:
Number Conver-
sion Block No. XXXXXXXX
assigned by
DXX
CM76 Y=00/90,
CM2A Y=50-52
NONE
2ND DATA
MEANING
X Station number to be terminated
Change terminating system to:
D02 Trunk Line (Direct) Appearance
D03 Trunk Line (Direct) Appearance +
TAS
D04 Direct-In Termination
D09 Automated Attendant
D10 Attendant Console + TAS
[8300R2]
D11 Attendant Console + Trunk Line
(Direct) Appearance
[8300R2]
D12 Attendant Console + Trunk Line
Appearance + TAS
[8300R2]
D13 TAS
D14 Attendant Console
[8300R2]
D16 Remote Access to System (DISA)
No data
3-387
CM76
: Default
REMARKS
CM10
NOTE 1 CM11
CM35
Y=018, 78
CM30 Y=02,
03, 40, 41
CM30 Y=18
CM30 Y=04,
05, 42, 43
CM49 CM64
Continued on next page
NWA-033623-001 Rev.3.0
91ch3005.fm
NOVEMBER/12/2008