NEC UNIVERGE SV8300 Command Manual page 230

COMMAND CODE TITLE:
20
(3) Name Display Registration From Multiline Terminal is as follows.
• You can configure the station number from the Multiline Terminal to which the station number
belongs.
• Register the characters from PCPro/CAT to SLT, Multiline Terminal without LCD and Trunk.
• The characters are specified by the number of pressing the keys (0-9, *, #).
• Refer to "Character Table"
Example: To register "A", press
By pressing same key 11 times, the character returns to the one pressed once.
• To register characters, press
• To switch between alphabet upper case (A-Z) and alphabet lower case (a-z), press
• To delete the data, overwrite by blank.
• The following is the example to register "john":
(1)
LNR/SPD
(2) Register the access code specified for Name Display
(SPDT receiving).
(3)
5 5
(4)
6 6
(5)
4 4
(6)
6 6
(7)
LNR/SPD
NUMBERING PLAN/SINGLE DIGIT FEATURE ACCESS CODE
(PROGRAMMABLE)
on next page.
key twice.
2
key after each character registration.
Hold
(DT receiving)
Hold
6 6 Hold
4 Hold
6 Hold
3-181
Recall
j
o
h
n
Continued on next page
NWA-033623-001 Rev.3.0
CM20
key.
91ch3003.fm