NEC UNIVERGE SV8300 Command Manual page 376

COMMAND CODE TITLE:
50
DATA TABLE:
Y
CODE
00 0 Two leading digits to be added
NOTE 1:
3 Access Code to be sent out before a Mail Box
number
4 Access Code to be sent out after a Mail Box
number
8 Access Code to be added to the calling station num-
ber when a call is terminated from a station.
This assignment is required to call back from the ana-
log telephone for Caller ID-Station.
[North America Only]
NOTE 2:
"C" or "D" should not be assigned as the first digit of a access code to insert a prepause
timing.
Assign the prepause timing by CM41 Y=0>44.
NOTE 3: If "C" is inserted in the access code, it can be used as a pause (1.5 seconds).
For providing the programmable pause, insert "D" instead of "C".
(Programmable pause; CM41 Y=0>38)
COMMON ROUTE INDIAL
KIND OF DATA
MEANING
CM35 Y=017 allows digits to be added or
deleted from indialed digit streams on a
route basis.
NOTE 2, NOTE 3
NOTE 2, NOTE 3
DATA
XX
(2 digits)
NONE
XX
XXXX
(2-4 digits)
NONE
X
XXXX
(1-4 digits)
NONE
3-327
: Default
SETTING DATA
MEANING
Digits to be added
No data
Access Code to be sent
out to a VMS
X: 0-9, A (*), B (#), C/D
(Pause)
Not to be sent out
Access Code to be added
X: 0-9, A (*), B (#)
No data
Continued on next page
NWA-033623-001 Rev.3.0
91ch3005.fm
CM50