NEC UNIVERGE SV8300 Command Manual page 281

COMMAND CODE TITLE:
35
Y
No. MEANING
024 DTMF Inter-digital pause
025 DP Make Ratio
BLADE RESET
026 DTMF signal width
028 Outgoing Trunk Queuing
032 Distinctive lamp indication
on Multiline Terminal dur-
ing external incoming call
termination
NOTE:
The lamp indication for an internal incoming call is red (120 IPM flashing). For indicating the termi-
nation of transferred external incoming call, the flashing lamp color depends on CM08>137.
033 Interval of SLT/Multiline
Terminal ringing signal to
station on incoming calls
[Other than North Amer-
ica]
NOTE: For SLT, Internal Ringing is applied. For Multiline Terminal, Special Ringing; 0.5 seconds ON-0.5 sec-
onds OFF
seconds ON-0.25 seconds OFF-0.25 seconds ON-0.25 seconds OFF
TRUNK ROUTE DATA
DATA
0 32 ms.
1 64 ms.
2 80 ms.
3 96 ms.
4 160 ms.
5 192 ms.
6 240 ms.
7 128 ms.
0 39 % Make Ratio
1 33 % Make Ratio
0 64 ms.
1 128 ms.
0 Not allowed
1 Allow
0 Green (120 IPM)
1 Red (120 IPM)
0 Ringing
1 Special Ringing
2 Internal Ringing
3 External Ringing
[For Australia/Asia/Africa/Europe/Latin America/Middle East/Russia]
SETTING DATA
MEANING
NOTE
See CM08>397
3-232
: Default
RELATED
COMMAND
CM15 Y=002
CM08>137
CM08>397
or 0.25
[For EU] is applied.
Continued on next page
NWA-033623-001 Rev.3.0
CM35
91ch3003.fm