NEC UNIVERGE SV8300 Command Manual page 288

COMMAND CODE TITLE:
35
Y=100-197
Y
No. MEANING
100
Kind of CCIS Trunk
BLADE RESET
NOTE:
When changing the data with online, the data is valid after the trunk blade is unplugged and plugged in.
101 Call still Hold
[Australia Only]
102 Reversal on Idle
[Australia Only]
103 Auto Polarity Collection
[Australia Only]
104 Polarity of 2-wire E&M/
4-wire E&M trunk (ODT)
105 Purpose of 2-wire E&M/
4-wire E&M trunk (ODT)
BLADE RESET
106 Malicious Call Trace
[Australia Only]
113 LAPD Mode of D-channel
route for WCS Roaming
[For PCS]
[8300R2]
BLADE RESET
LAPD Mode of D channel
route for Q-SIG
BLADE RESET
TRUNK ROUTE DATA
DATA
11 CCIS Trunk (T1)
14 2-wire E&M Trunk
NONE No data
0 Available
1 Not available
0 Available
1 Not available
0 Available
1 Not available
E wire
1 Open
2 Ground
3 Ground
0 2-wire E&M Trunk
1 4-wire E&M Trunk
NOTE:
0 Not provided
1 To provide
0 Network Mode
1 User Mode
0 Network Mode
1 User Mode
SETTING DATA
MEANING
M wire
Open Signaling (Type V)
Battery Signaling (Type I)
Ground Signaling (Type V/Type II)
All circuits in one ODT blade must be
set as the same type interface.
3-239
CM35
: Default
RELATED
COMMAND
CM15 Y=211
CM20: A170
CM90 Y=00:
F0A70
CM90 Y=00:
F6120
Continued on next page
NWA-033623-001 Rev.3.0
91ch3003.fm
NOVEMBER/12/2008