NEC UNIVERGE SV8300 Command Manual page 282

COMMAND CODE TITLE:
35
Y
No. MEANING
033 Interval of SLT/Multiline
Terminal ringing signal to
station on incoming calls
[North America Only]
NOTE:
For incoming calls to Trunk Line Appearance key on Multiline Terminal, the special ringing; 0.2 sec-
onds ON-0.2 seconds OFF will be applied.
034 Multiline Terminal Ringer
Tone Pattern on incoming
calls
Multiline Terminal ringer tone pattern is assigned by the following combination of CM35 Y=034 and 164.
Y=34
0 Ringer Tone Pattern 3
1 Ringer Tone Pattern 6
2 Ringer Tone Pattern 5
3 Ringer Tone Pattern 4
NOTE: For the Ringer Tone Pattern, see
036 Trunk seizure facility
037 MFC Signaling on DID
038 Enhanced 911
039 Trunk release by detecting
reversal of tip and ring on
outgoing C.O. call
TRUNK ROUTE DATA
DATA
0 0.4 seconds ON-0.2 seconds OFF-0.4 seconds
ON-2 seconds OFF
1 0.4 seconds ON-0.2 seconds OFF-0.4 seconds
ON-2 seconds OFF
2 1 second ON-2 seconds OFF
3 2 seconds ON-4 seconds OFF
0 See below
1
2
3
Y=164: 0
CM65
0 After dialing maximum number of digits
1 After completing dialed digits entered in CM8A
Y=4005-4007
0 Available
1 Not available
0 Available
1 Not available
0 Not released
1 To release
SETTING DATA
MEANING
: Default
Y=164: 1
Ringer Tone Pattern 0
Ringer Tone Pattern 1
Ringer Tone Pattern 2
Ringer Tone Pattern 7
Y=40.
3-233
CM35
: Default
RELATED
COMMAND
CM08>390
CM15 Y=083, 084
CM65 Y=40
CM8A
Y=4005-4007
Continued on next page
NWA-033623-001 Rev.3.0
91ch3003.fm