NEC UNIVERGE SV8300 Command Manual page 277

COMMAND CODE TITLE:
35
Y
No. MEANING
011 Toll Restriction
012 Number of digits to be
received on DID for Devel-
opment Table 0
013 Maximum number of send-
ing digits allowed on outgo-
ing connection
For C.O. trunks, data assign-
ment is not required.
014 SMDR/Centralized-Billing-
CCIS for outgoing call
TRUNK ROUTE DATA
DATA
0 To provide
3 Not provided
0 1 digit
1 2 digits
2 3 digits
3 4 digits
Ordinary TRK
NONE
Determined by
CM35 Y=076
000
001 1 digit
002 2 digits
003 3 digits
004 4 digits
005 5 digits
254 254 digits
NOTE 1:
NOTE 2:
0 Not provided
1 To provide
SETTING DATA
MEANING
Radio Paging TRK
2 digit + STN
NOTE 1
– Only dialed No. is sent
1 digit + STN
2 digits + STN
3 digits + STN
4 digits + STN
2 digits + STN
When CM35 Y=076 is set to 15, this
data setting is not required (release
the sender by time out or by answer
signal from the called distant office).
When CM35 Y=076 is set to 00-04,
specify the dialed digits which is
assigned by CM85.
STN means the calling party's
station number, and this number is
sent automatically by CM30
Y=28>x6.
3-228
CM35
: Default
RELATED
COMMAND
CM81, CM8A
CM85
CM35 Y=076
CM76
CM35 Y=018
CM35 Y=170
CM30 Y=28
CM35 Y=076
NOTE 2
Continued on next page
NWA-033623-001 Rev.3.0
91ch3003.fm