NEC UNIVERGE SV8300 Command Manual page 283

COMMAND CODE TITLE:
35
Y
No. MEANING
040 Abbreviated Codes for speed
calling for routing to C.O.
line when all tie lines are
busy
044 Trunk access code sent to
SMDR for outgoing call/
Trunk Access Code for
Trunk-Direct Appearance
Multiline Operation
NOTE:
When both CM35 Y=044 and CM35 Y=189 are set to the same trunk route, the setting of CM35 Y=189
is effective.
046 DP/DTMF sender release
timing
048 Sending Busy/Idle informa-
tion to network
[North America Only]
049 SMDR for incoming call
051 Restriction of outgoing con-
nection
(Unrestricted) (RCA)
052 Restriction of outgoing con-
nection
(Non-Restricted-1) (RCB)
053 Restriction of outgoing con-
nection
(Non-Restricted-2) (RCC)
TRUNK ROUTE DATA
DATA
00 Abbreviated Codes for System Speed Dialing
assigned by CM71>66
31
NONE No data
0 00 When a trunk is seized by a Trunk
or Appearance key or LCR, one or two-digit code
9 99 (00-99) is sent out to the SMDR.
NONE No data
0 2 seconds
1 4 seconds
2 6 seconds
3 8 seconds
4 12 seconds
5 14 seconds
6 16 seconds
7 10 seconds
0 Not available
1 Available
0 To provide
1 Not provided
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
SETTING DATA
MEANING
3-234
CM35
: Default
RELATED
COMMAND
CM71>66
CM72
CM35 Y=189
CM13 Y=05
CM12 Y=01
Continued on next page
NWA-033623-001 Rev.3.0
91ch3003.fm
NOVEMBER/12/2008