NEC UNIVERGE SV8300 Command Manual page 442

COMMAND CODE TITLE:
76
Y
No. MEANING
36 Specification of
the call terminat-
ing method for
DID incoming call
with no CLI in
Night Mode/
Mode A/Mode B
37 Distinctive lamp
indication on Mul-
tiline Terminal for
DID incoming call
with no CLI
NOTE:
This command is effective on the following conditions.
• CM35 Y=032 is set to 1.
• CM76 Y=34, 36 is set to 0 or 2, and Multiline Terminal receives the incoming call.
DIGIT CONVERSION ON DID CALL
1ST DATA
DATA
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
2ND DATA
MEANING
0 To transfer to the VRS/another sta-
tion/Attendant Console (assigned by
CM51 Y=33)
1 To reject the call termination
2 To terminate the Multiline Terminal
with unusual lamp indication/unusual
ringer tone/unusual ringer tone pat-
tern (assigned by CM76 Y=37, 38,
39)
3 To terminate as usual
0 Green (120 IPM)
1 Red (120 IPM)
3-393
CM76
: Default
REMARKS
CM51 Y=33
CM76 Y=35,
37, 38, 39
CM35
Y=032
CM76 Y=34,
36
Continued on next page
NWA-033623-001 Rev.3.0
91ch3005.fm
JULY/18/2008