[Cm93] Prime Line - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
93
FUNCTION:
This command is used to assign the prime line to a station line or a trunk line on a Multiline Terminal.
The prime line is the line seized when the Multiline Terminal user goes off-hook or presses the speaker
button.
PRECAUTION:
Any one station line or trunk line provided on the Multiline Terminal can be assigned as Prime Line.
ASSIGNMENT PROCEDURE:
93
ST + + DE +
DATA TABLE:
MY LINE
NUMBER
X
XXXXXXXX
PRIME LINE
MY LINE
+ DE +
NUMBER
(1-8 digits)
SETTING DATA
DATA
X Station number/Virtual Line number
NOTE:
XXXXXXXX
D000 Trunk number
D511
STATION TRUNK
NUMBER NUMBER
(1-8 digits) (4 digits)
MEANING
Any station number or Virtual Line
number can be assigned to the
Prime Line.
A single-line telephone cannot be
assigned as the Prime Line.
3-450
+ EXE
RELATED
COMMAND
CM10, CM11
CM30 Y=02, 03, 18
NWA-033623-001 Rev.3.0
91ch3006.fm
CM93