NEC UNIVERGE SV8300 Command Manual page 86

COMMAND CODE TITLE:
08
162 Multiple Radio Paging access after accessing a Radio Paging
trunk with delay type Radio Paging
NOTE: This is ineffective when CM08>157: 0.
163 Step Call for an incoming call from a Tie Line
165 Replay timer for Attendant Delay Announcement
[8300R2]
168 When the DTMF station or Multiline Terminal station dials "#"
during setting of Station Speed Dialing
171 When the DTMF station or Multiline Terminal station dials "*"
during setting of Station Speed Dialing
172 Automatic Idle Return on Multiline Terminal
176 1000-Slot Memory Block number "02" for Station Speed Dial-
ing is used as the Memory Block for System Speed Dialing
177 Last Number Call (Last Number Redial for Single Line Tele-
phone)
179 Ringing cadence on Direct in Termination
[Other than North America]
Ringing cadence on Direct in Termination
[North America Only]
180 Ringing cadence on Automated Attendant call, DID call and
Remote Access to System call
[Other than North America]
Ringing cadence on Automated Attendant call, DID call and
DISA call
[North America Only]
181 Multiline Terminal/DSS Console One-Touch key calling while
another party being rung, or while talking with another party
BASIC SERVICES
BASIC SERVICE
0 Not available
1 Available
0 Not available
1 Available
0 Replay at an interval
1 Replay only once
0 "#" is set as paused data (1.5 seconds)
1 "#" is set as dialed digit
0 "*" is set as programmable pause by
CM41 Y=0>38
1 "*" is set as dialed digit
0 Not available
1 Available
0 Available
1 Not available
0 Available
1 Not available
0 As per CM35 Y=033
1 Special Ringing
0 As per CM35 Y=033
1 0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
0 Special Ringing
1 As per CM35 Y=033 or CM76 Y=22
0 0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
1 As per CM35 Y=033 or CM76 Y=22
0 Not available
1 Available
3-37
: Default
SETTING DATA
See CM41 Y=0>47
See CM20>A068
See CM20>A069
See CM08>397
See CM08>397
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM08