NEC UNIVERGE SV8300 Command Manual page 60

COMMAND CODE
04
Y
No. MEANING
00 Display Language for
Multiline Terminal/
DESKCON LCD,
Default setting patterns
for Multiline Terminal,
Kind of Tone for IP Sta-
tion/TDM, Inquiry No.
in password lock state
for DT700 Series, Sin-
gle Line Telephone ring-
ing signal for Station-to-
Station connection, Sin-
gle Line Telephone ring-
ing signal from a trunk,
Special ringing signal
for Single Line Tele-
phone ring
TITLE:
DISPLAY LANGUAGE FOR MULTILINE TERMINAL/DESKCON LCD, DEFAULT SETTING
PATTERNS FOR MULTILINE TERMINAL, KIND OF TONE FOR IP STATION/TDM, INQUIRY
NO. IN PASSWORD LOCK STATE FOR DT700 SERIES, SINGLE LINE TELEPHONE
RINGING SIGNAL FOR STATION-TO-STATION CONNECTION, SINGLE LINE TELEPHONE
RINGING SIGNAL FROM A TRUNK, SPECIAL RINGING SIGNAL FOR SINGLE LINE
TELEPHONE RING, SETTING OF SERVICES, A-LAW/µ-LAW SETTING FOR EACH UNIT
1ST DATA
DATA MEANING
02 Default setting pattern for
Multiline Terminal
(System Base)
See Fixed pattern and
Programmable pattern
NOTE: When this data is set to "0", Fixed keys (Key No. 90-98) are set the same as
Fixed pattern 1-3 automatically.
2ND DATA
DATA
00 Default setting is not
provided
01 Fixed pattern 2
02 Fixed pattern 3
03 Programmable pattern 1
(As per CM90 Y=10)
NONE
Fixed pattern 1
3-11
: Default
RELATED
COMMAND
MEANING
CM10
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM04