NEC UNIVERGE SV8300 Command Manual page 380

COMMAND CODE TITLE:
51
MEANING
No.
08 Same as CM51 Y=06 (for station call)
09 Transfer destination of incoming call when a
called station is set to Call Forwarding-Busy
Line/No Answer and the destination of for-
warded call is set to the Attendant Console
Night Mode is set (for DID/Tie Line call)
NOTE:
In the following cases, the transfer destination can be also assigned by CM51 Y=09.
-Transferring a DID/Tie Line call when Do Not Disturb is set to the called station
-Transferring a station call/Priority Call to Attendant Position Night Mode is set
-Transferring DID/Tie Line/station call when the called station is set to Call Forwarding-Busy Line/
No Answer and the destination of forwarded call is set to the Attendant Position Night Mode is set
10 Transfer destination of incoming call when Do
Not Disturb is set to the called station (for sta-
tion call)
NOTE: For DID/Tie Line call, the transfer destination can be assigned by CM51 Y=09.
11 Transfer destination of the call when the
Room Cutoff station dials C.O. access code
12 Transfer destination of Off-Hook Alarm/Prior-
ity Call 0/1
AUTOMATIC TRANSFER DESTINATIONS
Y
See CM08>250, 251,
CM13 Y=02,
CM15 Y=017, 018
GROUP NUMBER
DATA MEANING
00 Tenant 00
63 Tenant 63
00 Tenant 00
63 Tenant 63
00 Tenant 00
63 Tenant 63
3-331
SETTING DATA
DATA MEANING
E000 Attendant Console
[8300R2]
EB000 Voice Response
System No.
EB007
NONE No data
X Station No.
XXXXXXXX
NONE No data
X Station No.
XXXXXXXX
E000 Attendant Console
[8300R2]
NONE No data
X Station No.
XXXXXXXX
E000 Attendant Console
[8300R2]
NONE No data
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM51
: Default
91ch3005.fm