NEC UNIVERGE SV8300 Command Manual page 134

COMMAND CODE TITLE:
0B
Y
No. MEANING
1XX 1 : VOIP Port
XX: Unit No. (01-50)
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
41 OAI Port number
NOTE: Only Unit No. 01 can be set by this data.
50 VLAN function
51 Priority of VLAN ID
NOTE:
The higher number has higher priority.
52 VLAN ID
NOTE 1:
One VLAN ID can be set per system.
NOTE 2:
VLAN ID 0 is not available.
60 Primary IP Address for
DNS server
NOTE 1, NOTE 2
61 Secondary IP Address
for DNS server
NOTE 1, NOTE 2
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the IP address by this data, a period (.) must be entered between
the numbers (example: 255.255.255.254).
2ND DATA
DATA
0 OAI port number 1024
1 OAI port number 1025
2 OAI port number 1039
3 OAI port number 60030
0 To provide
1 Not provided
0 Priority 0
1 Priority 1
2 Priority 2
3 Priority 3
4 Priority 4
5 Priority 5
6 Priority 6
7 Priority 7
1 VLAN ID
4094
NONE No data
XXX.XX IP Address for DNS server
...X (Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
NONE No data
3-85
RESET
: Default
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM0B
91ch3001.fm