ABB ACS355 series User Manual page 124

124 Program features
Name
Start/Stop control
Protections
Output signals
Timed functions
Description
Selecting the source for start and stop
signals of the two external control
locations, EXT1 and EXT2
Selecting between EXT1 and EXT2
Defining the direction control
Defining the start and stop modes
Selecting the use of Run enable signal
Setting the current and torque limits
Selecting the signals indicated through
relay output RO1 and, if MREL-01 output
relay module is in use, RO2...RO4.
Selecting the signals indicated through
analog output AO
Setting the minimum, maximum, scaling
and inversion
Setting the timed functions
Selecting the timed start/stop control for
external control locations EXT1 and EXT2
Selecting timed EXT1/EXT2 control
Activation of timed constant speed 1
Selecting timed function status indicated
through relay output RO1 or, if MREL-01
output relay module is in use, RO2...RO4.
Selecting timed PID1 parameter set 1/2
control
Set parameters
1001, 1002
1102
1003
2101...2103
1601
2003, 2017
Group 14 RELAY
OUTPUTS
Group 15 ANALOG
OUTPUTS
Group 36 TIMED
FUNCTIONS
1001, 1002
1102
1201
1401...1403, 1410
4027