List Of The Tasks And The Relevant Drive Parameters - ABB ACS355 series User Manual



List of the tasks and the relevant drive parameters

Depending on the selection made in the Application task (parameter
MACRO), the Start-up assistant decides which consequent tasks it suggests.
Name
Language select
Motor set-up
Application
Option modules
Speed control EXT1 Selecting the source for the speed
Speed control EXT2 Selecting the source for the speed
Torque control
PID control
Description
Selecting the language
Setting the motor data
Performing the motor identification. (If the
speed limits are not in the allowed range:
Setting the limits.)
Selecting the application macro
Activating the option modules
reference
(If AI1 is used: Setting analog input AI1
limits, scale, inversion)
Setting the reference limits
Setting the speed (frequency) limits
Setting the acceleration and deceleration
times
reference
(If AI1 is used: Setting analog input AI1
limits, scale, inversion)
Setting the reference limits
Selecting the source for the torque
reference
(If AI1 is used: Setting analog input AI1
limits, scale, inversion)
Setting the reference limits
Selecting the source for the process
reference
(If AI1 is used: Setting analog input AI1
limits, scale, inversion)
Setting the reference limits
Setting the speed (frequency) limits
Setting the source and limits for the
process actual value
Program features 123
9902 APPLIC
Set parameters
9901
9904...9909
9910
9902, parameters
associated to the macro
Group 35 MOTOR TEMP
MEAS, group 52 PANEL
COMM
9802
1103
(1301...1303, 3001)
1104, 1105
2001, 2002 (2007, 2008)
2202, 2203
1106
(1301...1303, 3001)
1107, 1108
1106
(1301...1303, 3001)
1107, 1108
1106
(1301...1303, 3001)
1107, 1108
2001, 2002 (2007, 2008)
4016, 4018, 4019