ABB ACS355 series User Manual page 201

All parameters
No. Name/Value
DI1,2,3(INV)
DI3,4,5(INV)
1202 CONST
SPEED 1
0.0...599.0 Hz /
0...30000 rpm
1203 CONST
SPEED 2
0.0...599.0 Hz /
0...30000 rpm
1204 CONST
SPEED 3
0.0...599.0 Hz /
0...30000 rpm
1205 CONST
SPEED 4
0.0...599.0 Hz /
0...30000 rpm
1206 CONST
SPEED 5
0.0...599.0 Hz /
0...30000 rpm
1207 CONST
SPEED 6
0.0...599.0 Hz /
0...30000 rpm
Description
Constant speed selection through inverted digital inputs DI1,
DI2 and DI3. 1 = DI active, 0 = DI inactive.
DI DI2 DI3 Operation
1 1 1 No constant speed
0 1 1 Speed defined by par.
1 0 1 Speed defined by par.
0 0 1 Speed defined by par.
1 1 0 Speed defined by par.
0 1 0 Speed defined by par.
1 0 0 Speed defined by par.
0 0 0 Speed defined by par.
See selection DI1,2,3(INV).
Defines constant speed (or drive output frequency) 1.
Speed in rpm. Output frequency in Hz if parameter
MOTOR CTRL MODE
Defines constant speed (or drive output frequency) 2.
Speed in rpm. Output frequency in Hz if parameter
MOTOR CTRL MODE
Defines constant speed (or drive output frequency) 3.
Speed in rpm. Output frequency in Hz if parameter
MOTOR CTRL MODE
Defines constant speed (or drive output frequency) 4.
Speed in rpm. Output frequency in Hz if parameter
MOTOR CTRL MODE
Defines constant speed (or drive output frequency) 5.
Speed in rpm. Output frequency in Hz if parameter
MOTOR CTRL MODE
Defines constant speed (or drive output frequency) 6.
Speed in rpm. Output frequency in Hz if parameter
MOTOR CTRL MODE
speed 6 is used also as jogging speed. See section
of a mechanical brake
Actual signals and parameters 201
1202 CONST SPEED 1
1203 CONST SPEED 2
1204 CONST SPEED 3
1205 CONST SPEED 4
1206 CONST SPEED 5
1207 CONST SPEED 6
1208 CONST SPEED 7
setting is SCALAR: FREQ.
setting is SCALAR: FREQ.
setting is SCALAR: FREQ.
setting is SCALAR: FREQ.
setting is SCALAR: FREQ.
setting is SCALAR: FREQ. Constant
on page 159.
Def/FbEq
-12
-13
E: 5.0 Hz
U: 6.0 Hz
9904 1 = 0.1 Hz
/ 1 rpm
E: 10.0 Hz
U: 12.0 Hz
9904 1 = 0.1 Hz
/ 1 rpm
E: 15.0 Hz
U: 18.0 Hz
9904 1 = 0.1 Hz
/ 1 rpm
E: 20.0 Hz
U: 24.0 Hz
9904 1 = 0.1 Hz
/ 1 rpm
E: 25.0 Hz
U: 30.0 Hz
9904 1 = 0.1 Hz
/ 1 rpm
E: 40.0 Hz
U: 48.0 Hz
9904 1 = 0.1 Hz
/ 1 rpm
Control