Electric Power Network Specification - ABB ACS355 series User Manual

Electric power network specification

Voltage (U )
1
Short-circuit capacity
Frequency
Imbalance
Motor connection data
Motor type
Voltage (U )
2
Short-circuit protection
(IEC 61800-5-1,
UL 508C)
Frequency
Frequency resolution
Current
Power limit
Field weakening point
Switching frequency
Speed control
Torque control
200/208/220/230/240 V AC 1-phase for 200 V AC drives
200/208/220/230/240 V AC 3-phase for 200 V AC drives
380/400/415/440/460/480 V AC 3-phase for 400 V AC drives
±10% variation from converter nominal voltage is allowed as default.
Maximum allowed prospective short-circuit current at the input power
connection as defined in IEC 61439-1:2009 and UL 508C is 100 kA.
The drive is suitable for use in a circuit capable of delivering not
more than 100 kA rms symmetrical amperes at the drive maximum
rated voltage.
50/60 Hz ± 5%, maximum rate of change 17%/s
Max. ±3% of nominal phase-to-phase input voltage
Asynchronous induction motor or permanent
magnet synchronous motor
0 to U , 3-phase symmetrical, U
1
The motor output is short-circuit proof by IEC 61800-5-1 and
UL 508C.
0...599 Hz
0.01 Hz
See section Ratings
1.5 · P
N
10...599 Hz
4, 8, 12 or 16 kHz (in scalar control)
See section Speed control performance figures
See section Torque control performance figures
at the field weakening point
max
on page 374.
Technical data 385
on page 145.
on page 146.