External Control - ABB ACS355 series User Manual



External control

When the drive is in external (remote) control, the commands are given through the
standard I/O terminals (digital and analog inputs) and/or the fieldbus interface. In
addition, it is also possible to set the control panel as the source for the external
control.
External control is indicated with REM on the panel display.
Assistant control panel
REM
DIR
The user can connect the control signals to two external control locations,
EXT2. Depending on the user selection, either one is active at a time. This function
operates on a 2 ms time level.

Settings
Panel key
LOC/REM
Parameter
1102
1001/1002
1103/1106

Diagnostics
Actual signal
0111/0112
49.1Hz
49 1 Hz .
0 5 A .
10 7 % .
00:00 MENU
Additional information
Selection between local and external (remote) control
Selection between
Start, stop, direction source for
Reference source for
Additional information
EXT1/EXT2 reference
Basic control panel
REM
OUTPUT
EXT1 and EXT2
EXT1/EXT2
EXT1/EXT2
Program features 127
491
.
Hz
FWD
EXT1 or