System Controls - ABB ACS355 series User Manual

All parameters
No. Name/Value
1503 AO1
CONTENT
MAX
x...x
1504 MINIMUM AO1 Defines the minimum value for the analog output signal AO.
0.0...20.0 mA
1505 MAXIMUM
AO1
0.0...20.0 mA
1506 FILTER AO1
0.0...10.0 s
16 SYSTEM
CONTROLS
1601 RUN ENABLE
NOT SEL
DI1
DI2
DI3
DI4
DI5
COMM
DI1(INV)
DI2(INV)
DI3(INV)
Description
Defines the maximum value for the signal selected with
parameter 1501 AO1 CONTENT
parameter 1502 AO1 CONTENT
Setting range depends on the parameter
CONTENT SEL setting.
See the figure for parameter
Minimum value
Defines the maximum value for the analog output signal AO.
See the figure for parameter
Maximum value
Defines the filter time constant for analog output AO, ie, the
time within which 63% of a step change is reached. See the
figure for parameter 1303 FILTER
Filter time constant
Parameter view, Run enable, parameter lock etc.
Selects a source for the external Run enable signal.
Allows the drive to start without an external Run enable
signal.
External signal required through digital input DI1. 1 = Run
enable. If Run enable signal is switched off, the drive will not
start or coasts to stop if it is running.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Fieldbus interface as the source for inverted Run enable
signal (Run disable), ie, Control word
1 bit 6 (with ABB drives profile
Control word is sent by the fieldbus controller through the
fieldbus adapter or embedded fieldbus (Modbus) to the
drive. For the Control word bits, see sections
communication profile
communication profile
External signal required through inverted digital input DI1. 0
= Run enable. If Run enable signal is switched on, the drive
will not start or coasts to stop if it is running.
See selection DI1(INV).
See selection DI1(INV).
Actual signals and parameters 209
SEL. See the figure for
MIN.
1501 AO1
1502 AO1 CONTENT
1502 AO1 CONTENT
AI1.
0301 FB CMD WORD
5319 EFB PAR 19
on page 333 and ABB drives
on page 328.
Def/FbEq
-
-
0.0 mA
MIN.
1 =
0.1 mA
20.0 mA
MIN.
1 =
0.1 mA
0.1 s
1 = 0.1 s
NOT SEL
0
1
2
3
4
5
7
bit 3). The
DCU
-1
-2
-3