Fba Data Out - ABB ACS355 series User Manual

All parameters
No. Name/Value

55 FBA DATA OUT

5501 FBA DATA
OUT 1
0
1...6
101...9999
5502 FBA DATA
OUT 2
... ...
5510 FBA DATA
OUT 10
84 SEQUENCE
PROG
8401 SEQ PROG
ENABLE
DISABLED
EXT2
EXT1
EXT1&EXT2
ALWAYS
Description
Data from the fieldbus controller to the drive through a
fieldbus adapter. See chapter
adapter on page 339.
Note: In adapter module the parameter group number is 2.
Selects data to be transferred from the fieldbus controller to
the drive.
Not in use
Control and status data words
5501 setting
1
2
3
4
5
6
Drive parameter
See 5501 FBA DATA OUT
...
See 5501 FBA DATA OUT
Sequence programming. See section
programming on page 169.
Enables Sequence programming.
If Sequence programming enable signal is lost, the
Sequence programming is stopped, Sequence
programming state (0168 SEQ PROG
and all timers and outputs (RO/TO/AO) are set to zero.
Disabled
Enabled in external control location 2 (EXT2)
Enabled in external control location 1 (EXT1)
Enabled in external control locations 1 and 2 (EXT1 and
EXT2)
Enabled in external control locations 1 and 2 (EXT1 and
EXT2) and in local control (LOCAL)
Actual signals and parameters 293
Fieldbus control with fieldbus
Data word
Control word
REF1
REF2
Status word
Actual value 1
Actual value 2
1.
1.
Sequence
STATE) is set to 1
Def/FbEq
DISABLE
D
0
1
2
3
4