ABB ACS355 series User Manual page 216

216 Actual signals and parameters
All parameters
No. Name/Value
1803 FILTER FREQ
IN
0.0...10.0 s
1804 TO MODE
DIGITAL
FREQUENCY
1805 DO SIGNAL
1806 DO ON DELAY Defines the operation delay for digital output DO.
0.0...3600.0 s
1807 DO OFF
DELAY
0.0...3600.0 s
1808 FO CONTENT
SEL
x...x
1809 FO CONTENT
MIN
x...x
1810 FO CONTENT
MAX
x...x
1811 MINIMUM FO
10...16000 Hz
Description
Defines the filter time constant for frequency input, ie, the
time within which 63% of a step change is reached. See
section Frequency input
Filter time constant
Selects the operation mode for the transistor output TO.
See section Transistor output
Transistor output is used as a digital output DO.
Transistor output is used as a frequency output FO.
Selects a drive status indicated through digital output DO.
See parameter 1401 RELAY OUTPUT
Delay time
Defines the release delay for digital output DO.
Delay time
Selects a drive signal to be connected to frequency output
FO.
Parameter index in group
example, 102 = 0102
Defines the minimum frequency output FO signal value.
Signal is selected with parameter
FO minimum and maximum correspond to
FO and 1812 MAXIMUM FO
FO
1812
1811
1809 1810
Setting range depends on parameter
SEL setting.
Defines the maximum frequency output FO signal value.
Signal is selected with parameter
See parameter 1809 FO CONTENT
Setting range depends on parameter
SEL setting.
Defines the minimum value for frequency output FO.
Minimum frequency. See parameter
MIN.
on page 135.
on page 136.
1.
01 OPERATING
SPEED.
1808 FO CONTENT
settings as follows:
FO
1812
1811
1809
FO
content
1808 FO CONTENT
1808 FO CONTENT
MIN.
1808 FO CONTENT
1809 FO CONTENT
Def/FbEq
0.1 s
1 = 0.1 s
DIGITAL
0
1
FAULT(-1)
0.0 s
1 = 0.1 s
0.0 s
1 = 0.1 s
104
DATA. For 1 = 1
-
SEL.
1811 MINIMUM
1810 FO
content
-
-
SEL.
-
10 Hz
1 = 1 Hz