ABB ACS355 series User Manual page 197

All parameters
No. Name/Value
SEQ PROG
AI1+SEQ
PROG
AI2+SEQ
PROG
ODVA HZ REF ODVA AC/DC profile speed reference and actual values in
1104 REF1 MIN
0.0...599.0 Hz /
0...30000 rpm
1105 REF1 MAX
0.0...599.0 Hz /
0...30000 rpm
1106 REF2 SELECT Selects the signal source for external reference REF2.
KEYPAD
AI1
AI2
AI1/JOYST
AI2/JOYST
DI3U,4D(R)
Description
Sequence programming output. See parameter
REF SEL.
Addition of analog input AI1 and Sequence programming
output
Addition of analog input AI2 and Sequence programming
output
Hz
Defines the minimum value for external reference REF1.
Corresponds to the minimum setting of the used source
signal.
Minimum value in rpm. Hz if parameter
MODE setting is SCALAR:
Example: Analog input AI1 is selected as the reference
source (value of parameter
minimum and maximum correspond to the
AI1 and 1302 MAXIMUM AI1
REF1 MAX
(1105)
REF1 MIN
(1104)
1302
-REF1 MIN
(1104)
-REF1 MAX
(1105)
Defines the maximum value for external reference REF1.
Corresponds to the maximum setting of the used source
signal.
Maximum value in rpm. Hz if parameter
CTRL MODE setting is
for parameter 1104 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
See parameter 1103 REF1
Actual signals and parameters 197
9904 MOTOR CTRL
FREQ.
1103 is AI1). The reference
1301 MINIMUM
settings as follows:
REF (Hz/rpm)
1301
1301
9904 MOTOR
SCALAR: FREQ. See the example
MIN.
SELECT.
SELECT.
SELECT.
SELECT.
SELECT.
SELECT.
Def/FbEq
8420 ST1 33
34
35
36
0.0 Hz /
1 rpm
1 = 0.1 Hz
/ 1 rpm
AI1 signal (%)
1302
E: 50.0 Hz
U: 60.0 Hz
1 = 0.1 Hz
/ 1 rpm
AI2
0
1
2
3
4
5