Reference Select - ABB ACS355 series User Manual

194 Actual signals and parameters
All parameters
No. Name/Value
11 REFERENCE
SELECT
1101 KEYPAD REF
SEL
REF1(Hz/rpm)
REF2(%)
1102 EXT1/EXT2
SEL
EXT1
DI1
DI2
DI3
DI4
DI5
EXT2
COMM
TIMED FUNC 1 Timed EXT1/EXT2 control selection. Timed function 1 active
TIMED FUNC 2 See selection
TIMED FUNC 3 See selection
TIMED FUNC 4 See selection
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
Description
Panel reference type, external control location selection and
external reference sources and limits
Selects the type of the reference in local control mode.
Speed reference in rpm. Frequency reference (Hz) if
parameter 9904 MOTOR CTRL MODE
FREQ.
%-reference
Defines the source from which the drive reads the signal
that selects between the two external control locations,
EXT1 or EXT2.
EXT1 active. The control signal sources are defined by
parameters 1001 EXT1 COMMANDS
SELECT.
Digital input DI1. 0 = EXT1, 1 = EXT2.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
EXT2 active. The control signal sources are defined by
parameters 1002 EXT2 COMMANDS
SELECT.
Fieldbus interface as the source for EXT1/EXT2 selection,
ie, Control word 0301 FB CMD WORD 1
drives profile 5319 EFB PAR 19
sent by the fieldbus controller through the fieldbus adapter
or embedded fieldbus (Modbus) to the drive. For the Control
word bits, see sections
333 and ABB drives communication profile
= EXT2, timed function 1 inactive = EXT1. See parameter
group 36 TIMED FUNCTIONS.
TIMED FUNC
TIMED FUNC
TIMED FUNC
Inverted digital input DI1. 1 = EXT1, 0 = EXT2.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
setting is
and 1103 REF1
and 1106 REF2
bit 5 (with ABB
bit 11). The Control word is
DCU communication profile
on page 328.
1.
1.
1.
Def/FbEq
REF1(Hz/
rpm)
1
SCALAR:
2
EXT1
0
1
2
3
4
5
7
8
on page
9
10
11
12
-1
-2
-3
-4
-5