How To Reset - ABB ACS355 series User Manual

350 Fault tracing

How to reset

The drive can be reset either by pressing the keypad key
RESET
(assistant control panel), through digital input or fieldbus, or by switching the
supply voltage off for a while. The source for the fault reset signal is selected by
parameter 1604 FAULT RESET
can be restarted.
Fault history
When a fault is detected, it is stored in the fault history. The latest faults are stored
together with the time stamp.
Parameters 0401 LAST
FAULT 2 store the most recent faults. Parameters
data at the time the latest fault occurred. The assistant control panel provides
additional information about the fault history. See section
99 for more information.
SEL. When the fault has been removed, the motor
FAULT, 0412 PREVIOUS FAULT 1
RESET
EXIT
(basic control panel) or
and 0413 PREVIOUS
0404...0409 show drive operation
Fault logger mode on page