Tools And Instruments - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)
Documentation
iBAT 2.0-CIM01C2 User
Manual
PDU8000 Integrated Power
Distribution Cabinet Quick
Guide (Modular)
iManager NetEco Device
Commissioning
Guide-(NetEco Version)
iManager NetEco Product
Document - (NetEco
Version)
ECC800 Data Center
Controller (ECC Version)
User Manual

1.6 Tools and Instruments

This section lists the tools and instruments required for installation.
Table 1-4 General tools
Name, Specifications, and Appearance
Protective gloves
Step ladder (2 m)
Issue 04 (2017-06-30)
Purpose
Describes the installation,
cable connection, and
power-on operations for the
CIM and BIM.
Describes the installation,
cable connection, and
power-on operations for the
integrated PDC.
Describes how to connect
monitoring hardware to the
NetEco.
Describes how to install
monitoring hardware and
configure monitoring
software.
Describes the overview of
the ECC800 and its ports,
installation, commissioning,
user interfaces,
maintenance, and
troubleshooting.
Marker
Phillips screwdriver
(M4, M6, and M8)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Installation Preparations
Obtaining Method
(Remarks)
Click Download.
The document is delivered
with the device, or you can
click Download.
The NetEco version depends
on the version in use. Click
on the NetEco WebUI to
obtain the NetEco version in
use. Click Download.
The NetEco version depends
on the version in use. Click
on the NetEco WebUI to
obtain the NetEco version in
use. Click Download.
The ECC800 version
depends on the version in
use. Click
WebUI to obtain the
ECC800 version. Click
Download.
Measuring tape (5
m)
Phillips screwdriver
M4 (length < 100
mm)
on the ECC800
Level
Flat-head
screwdriver (2–5
mm)
8