Engineering Procurement) Water Softener - Huawei FusionModule2000 Installation Manual

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)
Applicati
on
Scenario
Teamwork
control
networkin
g cable
and host
monitorin
g cable
Indoor and
outdoor
units

3.1.3.8 (Engineering Procurement) Water Softener

If the water hardness exceeds 100 mg/L (CaCO
reduce scaling and ensure the stable running of the system. The detailed specifications are as
follows:
Table 3-8 Water softener specifications
Item
Water flow
Water inlet pressure
Water inlet temperature
Water inlet hardness
Water outlet hardness
Filtration rate
Design pressure
Operating pressure
Issue 04 (2017-06-30)
Name Technical Specifications
M4/OT Bare crimp terminal, OT, 2.5 mm
terminal M4, 27 A, tin plating, 16–14 AWG
Cord end Bare crimp terminal, single cord
terminal end terminal, 2.5 mm
plating, insertion depth 8 mm, blue
Standard Balanced twisted pair, 100 ohm,
network cable enhanced class-five cable,
(optional) aluminum foil shield, 0.52 mm, 24
AWG, 8-core, four pairs,
PANTONE 430U, equipped with
plug 14080097
Cord end Bare crimp terminal, single cord
terminal for the end terminal, 1 mm
cable between plating, insertion depth 12 mm, red
the indoor and
outdoor units
Cord end Common terminal, single cord end
terminal for the terminal, 0.25 mm
communication insertion depth 6 mm, 2 A, light
s cable blue
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation Preparations
2
,
2
, 12.5 A, tin
2
, 5 A, tin
2
, 0.012 m,
), install water purification equipment to
3
Specifications
3
0.5 m /h
0.1–0.7 MPa
1–40° C
≤ 800 mg/L
≤ 3 mg/L
20–25 m/h
≤ 0.6 MPa
0.2–0.45 MPa
Remarks
Delivered with the
fittings
Delivered with the
fittings
1 PCS (10 m)
Delivered with the
fittings
Delivered with the
fittings
36