Huawei FusionModule2000 Installation Manual page 31

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)
Table 3-3 Pipe connection methods
Method
No. 1 in Figure
3-3
No. 2 in Figure
3-3
No. 3 in Figure
3-3
Figure 3-3 Connecting water pipes
(1) Conversion adapter: BSPT 1/2 inch,
connected to a rigid pipe with external
threads
(3) Pagoda connector: as shown in Figure
3-4
(5) Hose: a hose with an inner diameter of
3/4 inch and made of EPDM or other
materials
(7) Rigid pipe: made of PP-R, C-PVC, or
other materials
Components inside the dash-line boxes are ports on the equipment, with the dimension of BSPP 1/2 inch
and internal threads.
Issue 04 (2017-06-30)
Application Scenario
Humidifier water inlet pipe, and
pump drainpipe
Humidifier water inlet pipe, and
pump drainpipe
Automatic drainpipe
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation Preparations
Material
Conversion adapter and rigid pipe
Pagoda connector, hose, and hose
clamp
Conversion adapter and rigid pipe
(2) Rigid pipe: made of PP-R, C-PVC, or
other materials
(4) Hose clamp
(6) Conversion adapter: BSPT 1/2 inch,
connected to a rigid pipe with external
threads
22