Huawei FusionModule2000 Installation Manual page 52

FusionModule2000 Smart Modular Data Center
Installation Guide (2000 mm High Cabinets, Single-Row
Aisle Containment, 380 V)
Figure 3-23 Removing the L-shaped bracket
Ensure that the sliding plates are properly installed in step 2 in Figure 3-23. Otherwise, the sliding plates
may shift when the PDC is unloaded.
Step 7 Raise the four leveling feet using an adjustable wrench.
Figure 3-24 Raising the leveling feet
Step 8 Slide off the PDC and push it to the installation position.
----End
Issue 04 (2017-06-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation Preparations
43