Siemens SINUMERIK 840D sl Function Manual page 382

Data descriptions
9.1 Machine data for SINUMERIK 840D sl
36981
Meaning:
Special cases, errors,...
Additional reference
36982
MD number
Default value: 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
Special cases, errors,...
Additional reference
36985
MD number
Default value: 0
Change becomes effective after: POWER ON
Data type: DWORD
Meaning:
Special cases, errors,...
corresponds with ...
Additional reference
382
$MA_SAFE_SS_STATUS_OUTPUT
This machine data defines the output or the system variable for the "SBH active" signal.
Structure: Refer to the coding of the output assignment
Signal means
= 0, SBH is not active
= 1, SBH is active
$MA_SAFE_VELO_STATUS_OUTPUT[ 0 ... 1]
Output assignment active SG selection
Min. input limit: -
This machine data defines the outputs or the system variables for the signals "SG active bit
0" and "SG active bit 1".
Structure: Refer to the coding of the output assignment
n = 1, 0 stand for SG active bit 1, 0
Bit 1 = 0, bit 0 = 0: SG1 active, if SBH/SG active and SBH is not active; SBH active, if SBH/
SG active and SBH is active
Bit 1 = 1, bit 0= 0: SG2 active
Bit 1 = 0, bit 0= 1: SG3 active
Bit 1 = 1, bit 0= 1: SG4 active
$MA_SAFE_VELO_X_STATUS_OUTPUT
Output assignment n < n
x
Min. input limit: -
This machine data defines the output or the system variable for the signal "n < n
Structure: Refer to the coding of the output assignment
Signal means
= 0, actual speed is higher than the limit speed in MD36946 $MA_SAFE_VELO_X
= 1, actual speed is lower or equal to the limit speed
MD36946 $MA_SAFE_VELO_X
Protection level: 7/2
Protection level: 7/2
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Max. input limit: 84010620
Unit: -
Max. input limit: 84010620
Unit:
Safety Integrated
".
x