References - Siemens SINUMERIK 840D sl Function Manual

Appendix

13.2 References

Portfolio
Acceptance report
Approval procedure
Workshop
Hotline
On-site service (local)
13.2 References
/ASI/
Low-voltage switchgear and systems, Catalog Drive, Switchgear and Installation Technology
from Siemens
Order No.:
/6/
Reinert, D./Schäfer, M./Umbreit, M.: Drives and CNC systems with integrated safety (drives
and CNC systems), in: ETZ booklet, 11/98.
764
Description of services
Based on the submitted configuration documentation and commissioning,
an acceptance report for the safety functions is drawn-up. This includes:
● Description of the machine (name, type, ...)
● Description of the safety and operator concept
● Description of the axis-specific safety functions
● All of the safety functions are tested including the SPL logic
● The test results are recorded
The customer receives the acceptance report as hard copy and on an elec‐
tronic data medium.
Support with the handling and line of argument for the approval procedure
by certified bodies (e.g. the appropriate regulatory bodies/institutes for safe‐
ty and health) or large end customers.
Workshops are held on the subject of machine safety adapted to customer-
specific requirements; if required, these workshops can be held at the cus‐
tomer's site. Possible contents:
● Machinery Directive, Standards in general
● C Standards (machine-specific)
● Hazard analysis, risk analysis
● Control categories
● SINUMERIK Safety Integrated® - functions and system description
● Configuration, machine data
● Commissioning
● Acceptance report
An expert for "SINUMERIK Safety Integrated®" can be reached at the Hot‐
line number should critical errors or problems occur during installation and
commissioning.
Experts analyze problems that are encountered on site. The causes are
eliminated or counter-measures are drawn-up and implemented where nec‐
essary.
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Safety Integrated