System Features; System Requirements - Siemens SINUMERIK 840D sl Function Manual

System features

4.1

System requirements

● Software option "SINUMERIK Safety Integrated"
SI-Basic (including 1 axis/spindle, up to 4 SPL I/Os)
SI-Comfort (including 1 axis/spindle, up to 64 SPL I/Os)
SI-axis/spindle (in addition for each axis /spindle)
SI axis/spindle package (in addition, 15 axes/spindles)
SI-High Feature (including 1 axis/spindle to 192 SPL I/O)
SI Connect (16 safe connections)
* only for NCU 720.x and NCU 730.x
● SINUMERIK 840D sl; software release:
From 1.3.1 for safety functions integrated in the drive (SH/SBC via terminals, Chapter 4)
From 1.3.2 for safety functions integrated in the system (Chapters 5 to 7)
● Step7, V5.5
Firmware versions
In a system configuration, the firmware versions of the DRIVE-CLiQ components can only
differ from the versions on the CF card, if either
a) The automatic upgrade/downgrade (parameter p7826) is deactivated, or
b) components with a new firmware version can no longer be downgraded to the status of
the version available on the CF card.
Case a) is not permitted when Safety Integrated is used. The automatic upgrade/downgrade
must never be disabled when Safety Integrated is used. (automatic firmware update (p7826)
must be equal to 1)
Case b) is only permissible if this combination has been explicitly approved by the
manufacturer.
● SINUMERIK 840D sl; all NCU types can be used
● The measuring circuit cables must comply with the specifications of the SINAMICS S120.
● Safety-related devices/modules, that correspond to open-type devices according to UL 50,
may only be operated in enclosure-type housings/cabinets that have as a minimum degree
of protection IP54 in accordance with EN 60529. Further, chassis units with degree of
protection IP20 and IPXXB should be operated corresponding to EN 60529 in higher-level
enclosures.
Safety Integrated
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
WARNING
4
6FC5800-0AM63-0YB0
6FC5800-0AM64-0YB0
6FC5800-0AC70-0YB0
6FC5800-0AC60-0YB0
6FC5800-0AS68-0YB0*
6FC5800-0AS67-0YB0
41