Siemens SINUMERIK 840D sl Function Manual page 468

Safety integrated

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Data descriptions

9.2 Parameters for SINAMICS S120

p10230[0...5]

SI Motion SBT control word

Sets the signal sources for the Safe Brake Test control word.

This parameter is only applicable for "SBT via BICO" (p10203 = 1).

[0] = select brake test

[1] = start brake test

[2] = select brake

[3] = test torque select sign

[4] = select test sequence

[5] = external brake status

For BI: p10230[0]:

0/1 signal: Select the brake test.

0 signal: inactive.

For BI: p10230[1]:

0/1 signal: Start brake test.

For BI: p10230[2]:

1 signal: Select brake 2.

0 signal: Select brake 1.

For BI: p10230[3]:

1 signal: select negative test torque.

0 signal: select positive test torque.

For BI: p10230[4]:

1 signal: Select test sequence 2.

0 signal: select test sequence 1.

For BI: p10230[5]:

1 signal: External brake closed.

0 signal: External brake open.

Default value:

Minimum value:

Maximum value:

Protection level:

Effectiveness:

Unsigned32/Bina‐

Function Manual, 12/2017, 6FC5397-4BP40-6BA1

Safety Integrated