Siemens SINUMERIK 840D sl Function Manual page 472

Data descriptions
9.2 Parameters for SINAMICS S120
p10250 CI: SI Safety Control Channel control word S_STW1B
Sets the signal source for control word S_STW1B of the Safety Control Channel.
See also: p10203, r10251
Unit: Default value:
- 0
r10251.8...12 CO/BO: SI Safety Control Channel control word S_STW1B diagnostics
Display and BICO output for the diagnostics of control word S_STW1B of the Safety
Control Channel.
Bit signal name
08 Extended Functions test stop selection
1 signal: Selected, 0 signal: Not selected
09 Extended Functions trigger referencing
1 signal: Selected, 0 signal: Not selected
10 Extended Functions trigger reset
1 signal: Selected, 0 signal: Not selected
Extended Functions premature SOS after STOP D
1 signal: Selected, 0 signal: Not selected
Unit: Default value:
- -
p60122 IF1 PROFIdrive SIC/SCC telegram selection
Sets the telegram for the Safety Information Channel (SIC)/Safety Control Channel
(SCC)
The SIC/SCC telegram p60122 is attached to the PZD telegram p0922/p2079 with
no gaps.
700: Supplementary telegram 700, PZD-0/3
701: Supplementary telegram 701, PZD-2/5
999: Free telegram configuration with BICO
The distance to the PZD telegram can be increased with p2070/p2071 (this dis‐
tance is the number of receive words between the end of the PZD telegram and
the start of the SIC/SCC telegram). After changing p0922/p2079 or p2070/p2071,
p60122 must be set again.
The telegram interconnections can only be changed if p60122 and p0922 are set
equal to 999.
Unit: Default value:
- 999
472
Minimum value: Maximum value:
- -
Minimum value: Maximum value:
- -
Minimum value: Maximum value:
700 999
Checksum: Protection level:
Yes 3
Data type: Effectiveness:
Unsigned32/Inte‐ POWER ON
ger16
Checksum: Protection level:
Yes 3
Data type: Effectiveness:
Unsigned32 POWER ON
Checksum: Protection level:
No 3
Data type: Effectiveness:
Integer16 POWER ON
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Safety Integrated