Siemens SINUMERIK 840D sl Function Manual page 526

Commissioning
10.2 Images of the user interface and softkeys
The most important information about the active functions is displayed in the "Overview"
window:
● Axis/drive
All NC axes and drives in the system are displayed.
● Extended functions
This column displays whether and if yes, which extended functions are used for this axis
or this drive.
● Basic functions
This column displays as to whether a basic function is used for this axis or for this drive
and its associated control.
● Assignment
NC axis or internal Control Unit of the drive – or a drive object exists on the Control Unit,
to which an NC axis is assigned.
● Setting SI commissioning
Indicates whether the commissioning mode is active for the drive.
● Status symbols
The parameters are evaluated through two channels. The status symbols indicate as to
whether the parameters are identical in both channels.
Green: Parameterization in the 1st and 2nd monitoring channels identical
Red: Parameterization in the 1st and 2nd monitoring channel different
You can supplement or switch over the display in the "Overview" window:
● Using the "Safe drives" softkey, you can toggle between the displays of "All drives" and
"Safe drives".
● Using the "Confirm SI HW" softkey, you can confirm that hardware components have been
replaced after safety commissioning has been completed.
● You can change to the detailed view using the "Details" softkey.
526
Function Manual, 12/2017, 6FC5397-4BP40-6BA1
Safety Integrated