Figure 4-16
Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.2.12
PCU access (configuration)
This dialog specifies with which PCU and which login data the package should be connected
for the execution.
You can configure the following property groups for the "PCU access" dialog page:
● Dialog
● Address
● Login information
● Dialog scripts
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Select offline archive - Commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
165