Create MyConfig - Topo
6.6 Command line call
Parameter
Significance of the switch
Table 6-15
Topo - parameters
Switch
Arguments
-
<Topology path>
/diff
<file1>
<file2>
/silent
-
/deploy
<Deployment name>
/deploydir
<Deployment directory >
494
Optional
Description
No
● Specifies the path of the project file – either absolute
or relative.
● Paths must be specified in straight quotation marks if
spaces are included.
Example:
"C:\Path with spaces\Package file"
● For "*.uptz" topology projects, the name of the topology
to be compared must be specified after the path
separated by a colon.
If no name is specified, the first topology contained in
the project is selected.
● The following are permitted:
"*.uptz", "*.ust", "*.utz", "*.sdx", "*.uvdx" as well as files
according to the Topo interface description and
SINUMERIK archives.
No
● Two paths to "*.uptz", "*.ust", "*.utz", "*.sdx", "*.uvdx",
arc files.
● For "*.uptz" topology projects, the name of the topology
to be compared must be specified after the path
separated by a colon.
No
● The graphic user interface of Create MyConfig Topo is
hidden.
● The following options are only effective with this switch.
No
● Causes the topology selected in the project to be
checked and deployed.
● If the parameter is not specified, Topo generates the
name from <Topology path>.
Yes
● Specifies the deployment path, absolute or relative, in
which the topology is to be deployed.
● Paths must be specified in straight quotation marks if
spaces are included.
Example:
"C:\Path with spaces"
● If the switch is not specified, Topo uses the <Topology
path> folder.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE