Siemens SINUMERIK 840D sl Operating Manual page 240

Create MyConfig - Expert
4.4 Project folder
Creating a step link
Procedure
The following shows how a step is copied from a subproject (SP) and inserted into a main
project (MP) as link.
1. In the Steps tab in a project of your choice that you would like to use as a subproject (SP),
select a step and use Ctrl+C or the context menu to copy it.
Figure 4-54
Note
Drag-and-drop is not supported when linking steps.
2. Open the main project (MP) and use Ctrl+V to insert the step or use the context menu as
shown below.
The insertion can be in the level or in the sub level.
240
Copy link step
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE