Siemens SINUMERIK 840D sl Operating Manual page 477

①
Open DO
Clicking the blue plus character opens a drive object (DO).
A new dialog displays the components that belong to the DO.
②
Component display of a DO.
The component properties are changed in the components dialog.
Components can be added and/or deleted.
③
DO-independent components
These components are not permanently linked with the DO.
For example, these components are not retained when components are deleted.
④
Preconfigured components
Preconfigured components when components are created below a DO.
These components are not permanently linked with the DO and used only together with the DO.
The preconfigured components are also automatically copied when a DO is copied.
When a module in the topology is deleted, the associated preconfigured components are not deleted.
Preconfigured components are deleted, copied and edited via the context menu in the components dialog.
⑤
Insert a new component via the drop-down list.
Select a component class via the drop-down list. A component name is created automatically.
⑥
If the checkbox is activated, this indicates that the component is used in the topology.
⑦
If the checkbox is not activated, this indicates that the component is not used in the topology.
Figure 6-11 Editing the component list
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Topo
6.4 Topo - operation
477