Display Cross References - Siemens SINUMERIK 840D sl Operating Manual

4.9.2

Display cross references

Display options
There are several ways of displaying cross references. Cross references can be displayed for
a project with all linked components, for an individual component or for a cross-reference object
(e.g. an identifier in a manipulation task).
For the project with all linked components, select "Project > Display cross-references" and for
individual components "Component > Display cross-references."
Optionally you can display the corresponding cross references using the symbol bar.
To display individual cross-reference objects, put the cursor on the object in the editor and
select "Go to position of use" from the shortcut menu. The cross-references are then filtered
according to the object name. The object name of part of it can also be entered in the filter
field manually.
Overview of the user interface
The list of locations where cross reference objects are used is grouped using the two "Identifier"
and "Folder and file objects" tabs:
"Identifier" tab
Identifier Identifier is the unique identification of the cross reference object within the list.
Operator The operator specifies how the cross reference object is processed at the position where it is used.
Project/ Indicates in which project or in which component the cross-reference object is located.
Component
Step/ Indicates in which step or task the cross-reference object is located.
task
Line Indicates in which line, the cross-reference object is located.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Expert
4.9 Cross references
393