Siemens SINUMERIK 840D sl Operating Manual page 188

Create MyConfig - Expert
4.4 Project folder
By selecting the "data areas" in the "Package" tab, the usable dialog pages are defined in the
"Dialog" tab.
You can find an overview for this in the Dependencies of the dialog pages of data areas
(Page 144) section.
Overview of the System configuration dialog
The source or output data is provided via the "System configuration" dialog page.
This data is then manipulated later on the "SINAMICS topology" and "Step tree" dialog pages.
At the end of execution of the "Step tree" dialog page, the changed data is transferred to the
control or to the result archive.
On the "System configuration" dialog page, you can define for every archive area (NC, PLC,
DRV) whether it should be used.
For "Origin of data", select from where the data of the individual areas should be sourced. This
selection can be blocked individually for each area by the project engineer in order to prevent
changes by the operator during the package execution.
Show/hide inactive dialogs button
Clicking the
project.
Display associated system variables button
Clicking the
- system variables" dialog. All system variables used for "System configuration" are listed here.
Information on the system variables·can be found in the System variables for the System
configuration dialog (Page 378) section.
Further general information on the system variables can be found in the Reference list system
variables (Page 368) section.
Dialog
More detailed information about the "Dialog" property group can be found at Package
configuration (configuring) (Page 153).
Offline archives
The following property is available for the "offline archive":
List
188
button (Show/hide inactive dialogs) shows or hides dialogs not used in this
button (Display associated system variables) opens the "System configuration
The list of all offline archives to be included in the package is displayed
in the "List of offline archives".
SINUMERIK archives with NC data can be inserted or linked at "List of
offline archives". These archives are also saved in the package during
deployment and can be selected during package execution.
Several archives can be linked or inserted via the "List of offline archives"
property, which is available for the preselection and during package ex‐
ecution for selection.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE