Siemens SINUMERIK 840D sl Operating Manual page 48

Create MyConfig - Diff
3.3 SINUMERIK archive comparison
The identifiers extracted by Diff are fully qualified, i.e. they again include the definition of the
axis to which the data belongs.
Note
CHANDATA(1) is also automatically added for channel-independent data as this guarantees
that a previous channel assignment greater than 1 is reset again.
Channel-independent data must not be located below a CHANDATA instruction greater than
1.
Copy/export format "Value table"
For the copy/export format "Value table", data is extracted in tabular form. This means that all
selected identifiers are saved in the first column, and in the additional columns, the values of
the particular comparison object (archive, file or node).
To copy or export data in this way, select the identifiers in the Identifier column, as shown in
the following example.
For the selection shown, the following content is obtained for the clipboard (to insert in Excel)
or file:
Identifier
p125
p130
p131 [0]
p139 [0]
p139 [1]
p139 [2]
p140
48
1 DO3 (3.3.3 SERVO 11)
1
1
22
0
0
0
2
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
2 DO3 (3.3.3 SERVO 11)
1
1
19
0
0
0
2