Siemens SINUMERIK 840D sl Operating Manual page 479

If one of the versions based on a DO list is selected, the DO list contains preconfigured DO
properties and component properties. A DO list simplifies the assignment of properties when
configuring the topology.
Note
Working with DO list "*.uvd"
Importing and linking the existing "*.uvd" format is only possible directly in the DO list.
If you want to continue using the existing format, select "Without preconfiguration" and open
the DO list.
Set "*.uvd" and select the desired DO list.
Wiring modules
When wiring modules from the module catalog, the immediate assignment of a DO is initially
possible for each DO-forming or DO-referencing component of the module per dialog.
Figure 6-13 "Select DO" dialog
If an existing DO is selected from the DO list, a preconfigured component can be selected
from the component list for the selected DO in a further dialog for each component of the
module.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Topo
6.4 Topo - operation
479