Siemens SINUMERIK 840D sl Operating Manual page 419

Display Dialog page main instance: Step tree
The following example shows how a step tree can be structured in the logbook.
Figure 4-148 Example, display in the logbook: Dialog page Step tree (button Details on activated)
Display, subinstances in the step tree
Depending on the configuration, in the step tree there are several subinstances.
Level 1 of the subinstances contains the steps, below the step-event scripts and the
components, the actions, and finally the action-event scripts and the tasks.
Step Step - 1 Manipulate NC-Data [MNCD]
In this example, under the step 1 Manipulate NC-Data [MNCD] with Step ID MNCD there
is the internal component ./DescLogBook/IC1, which contains an action manipulate.
Below this there is a task for the NC target area with the name New Job. In the task, data in
channel 1 and in channel 2 are manipulated.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Expert
4.12 Package execution
419