End (Package Execution) - Siemens SINUMERIK 840D sl Operating Manual

Integrate create myconfig - diff, expert, topo
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Create MyConfig - Expert
4.4 Project folder
Show/hide inactive dialogs button
Clicking the
project.
Display associated system variables button
Clicking the
variables" dialog. All system variables used for "Finish" are listed in this dialog.
Information on the system variables·can be found in the System variables for the Finish
dialog (Page 382) section.
Further general information on the system variables can be found in the Reference list system
variables (Page 368) section.
Dialog
More detailed information about the "Dialog" property group can be found at Package
configuration (configuring) (Page 153).
Logbook
The following settings are available for the "Logbook" and are activated for the package
execution:
Storage location
File name
Note
Logbook storage
If a storage location has not been configured, the logbook is stored next to the package.
If a file name has not been configured, the logbook is stored next to the package with the file
name "<PackageName>_<Date>.<ext>" in the
"<PackageName>_<YYYMMDDhhmm>.<ext>" date format.
The <ext> file extension of the logbook file is determined by the password protection. If the
logbook is protected, the "*.exe" extension is used. If the logbook is not protected, the "*.htm"
extension is used.
For the package execution with the "Use NCU/PPU" > "Yes" configuration, the logbook is also
stored on the control at /card/install.
For a package that runs on the PCU or Windows PC, the logbook is also stored at:
d:\UP of the PCU, provided a PCU is involved.
4.4.2.40

End (package execution)

This dialog page completes the package execution and saves the logbook.
224
button (Show/hide inactive dialogs) shows or hides dialogs not used in this
button (Display associated system variables) opens the "Finish - system
You specify the storage location of the logbook here.
Specify the name of the logbook file without the "*.htm" file extension.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828d

Table of Contents