Package Execution Dialogs; Package Execution Logbook; General Information About The Logbook - Siemens SINUMERIK 840D sl Operating Manual

Procedure
1. Create an "sci.ini" file with the entry: "Start=//<domain>/<user>%<password>@<Server>/
<release>/<package name>.usz".
The specification of the domain is optional.
Example: Start=//wwprod/user%pass@192.168.100.2/Share/NCU_Pack.usz
2. Save this file in the "/<responsible>/system/etc" folder of the CompactFlash card.
Whereby, <responsible> can be "siemens", "addon", "oem" or "user".
3. Activate the "Off/On" main switch.
4. Follow the instructions of the package dialogs.
Note
The "sci.ini" file is deleted from the package once it has been started. This will ensure that
a package is not unintentionally executed several times.
See also
Precondition (Page 406)
4.12.3.5

Package execution dialogs

The package execution dialogs can be seen at Dialogs (Page 142).
Package execution is shown in the descriptions for the dialog pages in the "Dialog view while
executing the package (for commissioning engineers / operators)" section.
4.12.4

Package execution logbook

4.12.4.1

General information about the logbook

The logbook is automatically generated during package execution. The logbook contains
detailed information about the package; all package actions are documented.
Note
Logbook - diagnostics
Note that logbooks do not provide any proof of correct commissioning, but rather are used for
diagnosis.
The logbook is saved in HTML format in a file with extension ""*.htm"" for an unprotected
logbook and in a file with extension ""*.exe"" for a password-protected logbook.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Expert
4.12 Package execution
411