Siemens SINUMERIK 840D sl Operating Manual page 251

● "Dialogs" tab > "Step tree"
You can display the "List of step configurations" "*upcfg" and preselect the desired
configuration.
– List
Figure 4-63 List of step configurations
– Preselection
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
To do this, select the "Step tree" dialog page in the "Dialogs" tab. In the "Step
configuration" property at "List", click the
configurations" dialog. The available configurations with their properties are displayed
as a list.
You preselect a configuration at Preselection via the "Preselect from list" context menu.
The preselected configuration is displayed with the "*.upcfg" file name.
Create MyConfig - Expert
button to open the "*.upcfg" "List of step
4.4 Project folder
251