Philips LPC213 Series User Manual page 205

Philips Semiconductors
Volume 1
Table 175: Consolidated Time register 0 (CTIME0 - address 0xE002 4014) bit description
Bit
5:0
7:6
13:8
15:14
20:16
23:21
26:24
31:27
18.4.10 Consolidated Time register 1 (CTIME1 - 0xE002 4018)
The Consolidate Time register 1 contains the Day of Month, Month, and Year values.
Table 176: Consolidated Time register 1 (CTIME1 - address 0xE002 4018) bit description
Bit
4:0
7:5
11:8
15:12
27:16
31:28
18.4.11 Consolidated Time register 2 (CTIME2 - 0xE002 401C)
The Consolidate Time register 2 contains just the Day of Year value.
Table 177: Consolidated Time register 2 (CTIME2 - address 0xE002 401C) bit description
Bit
11:0
31:12
18.4.12 Time counter group
The time value consists of the eight counters shown in
counters can be read or written at the locations shown in
User manual
Symbol Description
Seconds Seconds value in the range of 0 to 59
- Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Minutes Minutes value in the range of 0 to 59
- Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Hours Hours value in the range of 0 to 23
- Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Day Of Week Day of week value in the range of 0 to 6
- Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Symbol Description
Day of Month Day of month value in the range of 1 to 28, 29, 30, or 31
(depending on the month and whether it is a leap year).
- Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Month Month value in the range of 1 to 12.
- Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Year Year value in the range of 0 to 4095.
- Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Symbol Description
Day of Year Day of year value in the range of 1 to 365 (366 for leap years).
- Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
Rev. 01 — 24 June 2005
UM10120
Chapter 18: RTC
Table 178 and Table 179. These
Table 179.
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Reset
value
NA
NA
NA
NA
NA
NA
NA
NA
Reset
value
NA
NA
NA
NA
NA
NA
Reset
value
NA
NA
205