Table of Contents
Advertisement
Philips Semiconductors
Volume 1
Table 56:
Pin description
Symbol
Pin
[2]
P0.16/EINT0/
46
MAT0.2/CAP0.2
[1]
P0.17/CAP1.2/
47
SCK1/MAT1.2
[1]
P0.18/CAP1.3/
53
MISO1/MAT1.3
[1]
P0.19/MAT1.2/
54
MOSI1/CAP1.2
[2]
P0.20/MAT1.3/
55
SSEL1/EINT3
[4]
P0.21/PWM5/
1
AD1.6/CAP1.3
[4]
P0.22/AD1.7/
2
CAP0.0/MAT0.0
[1]
P0.23
58
[5]
P0.25/AD0.4/
9
Aout
[4]
P0.26/AD0.5
10
User manual
...continued
Type
Description
I/O
P0.16 — General purpose digital input/output pin
I
EINT0 — External interrupt 0 input.
O
MAT0.2 — Match output for Timer 0, channel 2.
I
CAP0.2 — Capture input for Timer 0, channel 2.
I/O
P0.17 — General purpose digital input/output pin
I
CAP1.2 — Capture input for Timer 1, channel 2.
I/O
SCK1 — Serial Clock for SSP. Clock output from master or input to slave.
O
MAT1.2 — Match output for Timer 1, channel 2.
I/O
P0.18 — General purpose digital input/output pin
I
CAP1.3 — Capture input for Timer 1, channel 3.
I/O
MISO1 — Master In Slave Out for SSP. Data input to SPI master or data
output from SSP slave.
O
MAT1.3 — Match output for Timer 1, channel 3.
I/O
P0.19 — General purpose digital input/output pin
O
MAT1.2 — Match output for Timer 1, channel 2.
I/O
MOSI1 — Master Out Slave In for SSP. Data output from SSP master or data
input to SSP slave.
I
CAP1.2 — Capture input for Timer 1, channel 2.
I/O
P0.20 — General purpose digital input/output pin
O
MAT1.3 — Match output for Timer 1, channel 3.
I
SSEL1 — Slave Select for SSP. Selects the SSP interface as a slave.
I
EINT3 — External interrupt 3 input.
I/O
P0.21 — General purpose digital input/output pin
O
PWM5 — Pulse Width Modulator output 5.
I
AD1.6 — A/D converter 1, input 6. This analog input is always connected to
its pin. Available in LPC2134/6/8 only.
I
CAP1.3 — Capture input for Timer 1, channel 3.
I/O
P0.22 — General purpose digital input/output pin
I
AD1.7 — A/D converter 1, input 7. This analog input is always connected to
its pin. Available in LPC2134/6/8 only.
I
CAP0.0 — Capture input for Timer 0, channel 0.
O
MAT0.0 — Match output for Timer 0, channel 0.
I/O
P0.23 — General purpose digital input/output pin
I/O
P0.25 — General purpose digital input/output pin
I
AD0.4 — A/D converter 0, input 4. This analog input is always connected to
its pin.
O
Aout — D/A converter output. Available in LPC2132/4/6/8 only.
I/O
P0.26 — General purpose digital input/output pin
I
AD0.5 — A/D converter 0, input 5. This analog input is always connected to
its pin.
Rev. 01 — 24 June 2005
UM10120
Chapter 6: Pin Configuration
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
69
Advertisement
Table of Contents
