NEC NEAX 2000 IVS Command Manual page 105

CM08
COMMAND CODE
08
BASIC SERVICE FEATURE
268 Call termination to My Line while the extension makes a call
with a secondary extension or trunk line on Multiline Termi-
nal.
Note: When 0 (Restricted) is set, 0 (Station Base) should
be set by CM08-269.
269 Busy indication on BLF of ATTCON, DSSCON or Multiline
Terminal by Station Base or Extension Base.
270 Voice Call when calling a Multiline Terminal set to Voice
first from a single-line telephone or a Multiline Terminal
without an LCD.
274 Line lockout indication on DSS Console.
279 Voice call when a called Multiline Terminal goes on-hook
while receiving an Off-Hook Voice Announcement.
280 Time Display for Message Reminder/Message Waiting Ser-
vice (System/Individual) on Multiline Terminal.
281 Maid Identification Number used for Mail Status.
Note 2
282 Message "RING ON OK" is printed out when a wake-up call starts.
283 Message "STATION BUSY" is printed out when the station
is busy on a wake-up call.
284 Message "CONNECTION BLOCK" is printed out when a
wake-up call is unsuccessful.
286 Message "STATION ANSWER" is printed out when the sta-
tion answers a wake-up call.
287 Message "STATION NO ANSWER" is printed out when the
station does not answer the wake-up call.
289 Room cutoff
293 Wake-Up Time Display on the Front Desk Terminal
294 MW Lamp Indication on Multiline Terminal to which Mes-
sage Waiting/Message Reminder is set.
301 When system is initialized.
CHAPTER 3
Page 82
Revision 2.0
TITLE:
BASIC SERVICE FEATURES
ND-45669 (E)
SETTING DATA
0 Restricted
1 Allowed
0 Station Base
1 Extension Base
0 Not provided (Busy Tone)
1 To provide
0 Available
1 Not available
0 Not provided (Ring Tone)
1 To provide
0 24-Hour (Military Format)
1 12-Hour
0 Available
1 Not available
0 Not printed
Note 2 1 To print
0 Not printed
Note 2
1 To print
0 Not printed
Note 2
1 To print
0 Not printed
Note 2
1 To print
0 Not printed
Note 2 1 To print
0 Not allowed
1 Allowed
0 24-Hour (Military Format)
1 12-Hour
0 Flashing (60 IPM)
1 Steady Lighting
term
0 D MIC lamp ON
term
1 D MIC lamp OFF
Initial Data
: